# Schope in Logic 9.1
**URL:** https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634
**Category:** Schope
**Created:** [July 5, 2010, 10:12am UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634 "2010-07-05T10:12:53Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@MarcusH](https://forums.stillwellaudio.com/u/MarcusH)
#### Post date: [July 5, 2010, 10:12am UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634/1 "2010-07-05T10:12:53Z")
Hi
I’ve just downloaded Schope but I can’t use it in Logic. I’m getting this:-
- I’ve tried re-downloading in case it was corrupted
- But corruption unlikely as was successfully validated by AU manager.
- Logic Pro 9.1.1 • OS X 10.6.4 • MacBook Pro
Help appreciated
Marcus
---
### Author:  [@scott](https://forums.stillwellaudio.com/u/scott)
#### Post date: [July 5, 2010, 3:28pm UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634/2 "2010-07-05T15:28:59Z")
Marcus,
I’ll make sure schwa sees this, but do me a favor and please send an email describing this problem (link to this forum thread if you like) to support at stillwellaudio dot com so we can capture this in our ticket system. Trying to make sure things don’t fall through the cracks.
Scott
---
### Author:  [@schwa](https://forums.stillwellaudio.com/u/schwa)
#### Post date: [July 5, 2010, 3:30pm UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634/3 "2010-07-05T15:30:44Z")
Did the AU validation give any warnings at all?
---
### Author:  [@MarcusH](https://forums.stillwellaudio.com/u/MarcusH)
#### Post date: [July 5, 2010, 3:49pm UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634/4 "2010-07-05T15:49:03Z")
> [@schwa](#):
>
> Did the AU validation give any warnings at all?
Nothing remarkable - no warnings.
---
### Author:  [@MarcusH](https://forums.stillwellaudio.com/u/MarcusH)
#### Post date: [July 7, 2010, 11:40am UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634/5 "2010-07-07T11:40:33Z")
Schwa
I was wrong; there are a couple of warnings. Here’s the AU Manager validation readout.
Marcus
"validating Audio Unit Schope by Schwa:
* * *
```
AU Validation Tool
Version: 1.6.1a1
Copyright 2003-2007, Apple, Inc. All Rights Reserved.
Specify -h (-help) for command options
```
* * *
* * *
## VALIDATING AUDIO UNIT: ‘aufx’ - ‘Schp’ - ‘Schw’
Manufacturer String: Schwa
AudioUnit name: Schope
Component Version: 1.87.0 (0x15700)
-
- PASS
* * *
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 87.166 ms
WARM:
Time to open AudioUnit: 1.684 ms
FIRST TIME:
Time for initialization: 0.037 ms
-
- PASS
* * *
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:2
Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, ‘lpcm’ (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, ‘lpcm’ (0x00000029) 32-bit little-endian float, deinterleaved
Output Scope Bus Configuration:
Default Bus Count:1
Default Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, ‘lpcm’ (0x00000029) 32-bit little-endian float, deinterleaved
-
- PASS
* * *
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
-
- PASS
* * *
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
VERIFYING PROPERTY: Tail Time
PASS
VERIFYING PROPERTY: Bypass Effect
PASS
-
- PASS
* * *
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Supported Number of Channels
PASS
VERIFYING PROPERTY Host Callbacks
PASS
-
- PASS
* * *
VERIFYING SPECIAL PROPERTIES:
VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw Schp Schw - Schwa: Schope Carbon View
PASS
Cocoa Views Available: 1
Schope\_View
PASS
DEFAULT PRESET: 0, Name:
HAS FACTORY PRESETS
VERIFYING CLASS INFO
WARNING: Preset name is not retained in retrieved class data
PASS
TESTING HOST CALLBACKS
PASS
-
- PASS
* * *
PUBLISHED PARAMETER INFO:
# # # 16 Global Scope Parameters:
WARNING: retrievedValue = 0.999000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.746117 (was 0.000000), Parameter did not retain minimum value when set
-
- PASS
* * *
FORMAT TESTS:
Reported Channel Capabilities (explicit):
[1, 1] [2, 2] [4, 2]
Input/Output Channel Handling:
1-1 1-2 1-4 1-5 1-6 1-7 1-8 2-2 2-4 2-5 2-6 2-7 2-8 4-4 4-5 5-5 6-6 7-7 8-8
X X
-
- PASS
* * *
RENDER TESTS:
Input Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, ‘lpcm’ (0x00000029) 32-bit little-endian float, deinterleaved
Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, ‘lpcm’ (0x00000029) 32-bit little-endian float, deinterleaved
Render Test at 512 frames
Slicing Render Test at 64 frames
PASS
Render Test at 64 frames, sample rate: 22050 Hz
Render Test at 137 frames, sample rate: 96000 Hz
Render Test at 4096 frames, sample rate: 48000 Hz
Render Test at 4096 frames, sample rate: 192000 Hz
Render Test at 4096 frames, sample rate: 11025 Hz
Render Test at 512 frames, sample rate: 44100 Hz
PASS
1 Channel Test:
In and Out Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, ‘lpcm’ (0x00000029) 32-bit little-endian float, deinterleaved
Render Test at 512 frames
PASS
Checking connection semantics:
Connection format:
AudioStreamBasicDescription: 2 ch, 44100 Hz, ‘lpcm’ (0x00000029) 32-bit little-endian float, deinterleaved
PASS
Bad Max Frames - Render should fail
PASS
Checking parameter setting
Using AudioUnitSetParameter
Using AudioUnitScheduleParameter
PASS
-
- PASS
* * *
## AU VALIDATION SUCCEEDED.
validation result: successfully validated
updating properties of AU Schope by Schwa…done.
"
---
### Author:  [@salzmusic](https://forums.stillwellaudio.com/u/salzmusic)
#### Post date: [June 28, 2011, 4:21pm UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634/6 "2011-06-28T16:21:27Z")
Having the same problem running Logic 9.1.3. Any ideas on how to get this working? Downloaded the version on the website.
Thanks!
---
### Author:  [@Auram](https://forums.stillwellaudio.com/u/Auram)
#### Post date: [July 27, 2011, 9:15am UTC](https://forums.stillwellaudio.com/t/schope-in-logic-9-1/634/7 "2011-07-27T09:15:30Z")
This plug-in was recommended in Mike Senior’s book and I was eager to try it; but I’m having the same problem mentioned above. Logic Audio Unit validation reports no errors and issues a PASS, but I still get the dialogue shown above when I try to insert Schope. As the first post about it was a year ago and the problem persists can I assume there is no solution and I just have to bin the plug-in? I’ve searched the other forums for answers to the same problem and can find nothing.
I’m using Logic 9.1.4 (32bit) on a MacBook Pro 10.6.8 and Logic 9.0.2 on a G5 PowerMac running 10.5.8. Same problem on both machines. Any help would be much appreciated.
Regards, A