# Here is what I see
**URL:** https://forums.stillwellaudio.com/t/here-is-what-i-see/76
**Category:** Schwa Plugs
**Created:** [September 13, 2007, 2:26pm UTC](https://forums.stillwellaudio.com/t/here-is-what-i-see/76 "2007-09-13T14:26:17Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@jeromee](https://forums.stillwellaudio.com/u/jeromee)
#### Post date: [September 13, 2007, 2:26pm UTC](https://forums.stillwellaudio.com/t/here-is-what-i-see/76/1 "2007-09-13T14:26:17Z")
Hi Schwa
Here is a screenshot of what I am getting.
Thanks
J
[img:f5960][http://www.andrestudioinc.com/pix/Sample.jpg[/img:f5960]](http://www.andrestudioinc.com/pix/Sample.jpg%5B/img:f5960%5D)
---
### Author:  [@scott](https://forums.stillwellaudio.com/u/scott)
#### Post date: [September 13, 2007, 4:06pm UTC](https://forums.stillwellaudio.com/t/here-is-what-i-see/76/2 "2007-09-13T16:06:38Z")
J,
Since the forum truncates the edges of the images, why don’t you use a free service like [stashbox.org](http://stashbox.org) or imageshack to host the image, then just put a link to it in your message?
You don’t HAVE to, obviously, but it might make things more clear.
Scott
---
### Author:  [@schwa](https://forums.stillwellaudio.com/u/schwa)
#### Post date: [September 13, 2007, 7:07pm UTC](https://forums.stillwellaudio.com/t/here-is-what-i-see/76/3 "2007-09-13T19:07:54Z")
Re the forum cutting off images – if you right-click “view image” you get to see the whole thing.
Jeromee, I think that’s entirely to do with the horizontal axis scaling … in Schope, the bold vertical lines between 0 and 500 Hz are 10 Hz & 100 Hz respectively … so that first power peak is somewhere around 70-ish Hz, which I think agrees with Inspector. And the vertical axis scaling is different too, you get much more differentiation between “quiet” (-27 dB) and “inaudible” (-75 dB) in schope 🙂
Grab the right-hand side of the horizontal zoom slider and move it left – you can zoom in so you are looking only at the area from 0-100 Hz which would be useful here. And if you want more definition in the super-quiet higher frequencies, more the vertical zoom slider up.
Please let me know if this helps you better see what you want to see.
Thanks,
Schwa.
---
### Author:  [@jeromee](https://forums.stillwellaudio.com/u/jeromee)
#### Post date: [September 13, 2007, 7:24pm UTC](https://forums.stillwellaudio.com/t/here-is-what-i-see/76/4 "2007-09-13T19:24:18Z")
Thanks Schwa!
Like I stated before, I think it is more so an issue of me learning to read your plug. It was freaking me out a little with all of that low freq showing up. But hey maybe it will help me create better mixes:)
Thanks again
J
---
### Author:  [@jeromee](https://forums.stillwellaudio.com/u/jeromee)
#### Post date: [September 13, 2007, 7:26pm UTC](https://forums.stillwellaudio.com/t/here-is-what-i-see/76/5 "2007-09-13T19:26:07Z")
[quote=“scott”:419ce]
J,
Since the forum truncates the edges of the images, why don’t you use a free service like [stashbox.org](http://stashbox.org) or imageshack to host the image, then just put a link to it in your message?
You don’t HAVE to, obviously, but it might make things more clear.
Scott
[/quote:419ce]
Will do:)
Thanks
J
---
### Author:  [@schwa](https://forums.stillwellaudio.com/u/schwa)
#### Post date: [September 13, 2007, 7:53pm UTC](https://forums.stillwellaudio.com/t/here-is-what-i-see/76/6 "2007-09-13T19:53:38Z")
Well for sure Jeromee, try zooming in on frequency ranges of interest … that should give you a lot more information.