# Apologies for my ignorance....

**URL:** https://forums.stillwellaudio.com/t/apologies-for-my-ignorance/273
**Category:** Schope
**Created:** [September 21, 2008, 11:16am UTC](https://forums.stillwellaudio.com/t/apologies-for-my-ignorance/273 "2008-09-21T11:16:27Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Bid](https://forums.stillwellaudio.com/letter_avatar_proxy/v4/letter/b/fbc32d/32.png) [@Bid](https://forums.stillwellaudio.com/u/Bid)
#### Post date: [September 21, 2008, 11:16am UTC](https://forums.stillwellaudio.com/t/apologies-for-my-ignorance/273/1 "2008-09-21T11:16:27Z")

</div>

Hello everyone…

I’m not sure if this question has been asked ( I couldn’t find any direct reference to it)… but I am struggling to route any of my audio channels to the 4 respective in/outs…it’s the routing part that I am failing to figure out. Do I need to open several instances of the plug in, on respective channels, and then route them to a master Schope so to speak ? Or is that completely wrong ?

Please could someone explain how this is done? I am using SX 3.

I am starting to assume from reading some previous posts that I need to set the Schope up using the Quad routing method, but if anyone has 2 secs to give me a walk through I would appreciate it.

Thanks in advance, hope to get it working soon  
Bid

---

<div class="post-metadata">

### Author: ![schwa](https://forums.stillwellaudio.com/letter_avatar_proxy/v4/letter/s/c57346/32.png) [@schwa](https://forums.stillwellaudio.com/u/schwa)
#### Post date: [September 21, 2008, 11:57am UTC](https://forums.stillwellaudio.com/t/apologies-for-my-ignorance/273/2 "2008-09-21T11:57:49Z")

</div>

Hi. To view 4 input channels in SX3, you need to set it up just like a sidechain. Here’s a popular youtube video on setting up sidechains in SX3: [youtube.com/watch?v=1HMGu-8p0go](http://www.youtube.com/watch?v=1HMGu-8p0go)

But we’ll be adding a cool feature to Schope in the next few days that will make this much easier! I’ll let you know when we release it (it will be a free update).

---

<div class="post-metadata">

### Author: ![Bid](https://forums.stillwellaudio.com/letter_avatar_proxy/v4/letter/b/fbc32d/32.png) [@Bid](https://forums.stillwellaudio.com/u/Bid)
#### Post date: [September 21, 2008, 12:03pm UTC](https://forums.stillwellaudio.com/t/apologies-for-my-ignorance/273/3 "2008-09-21T12:03:39Z")

</div>

Ah I thought that would be the case, thanks very much for the speedy reply 🙂